Ideas To Fight The Invasion Of Cables On Your Desktop

One of the main problems we have when organizing our desk is cables. An aspect in which the main devices that we use have a tendency to eliminate, but since the professionals of the sector do not work miracles, there are still many devices that have to continue using cables. So it does not hurt to have some ideas to see how to fight against this invasion of cables or at least try to make the cables that we have on our desk disturb as little as possible, both visually and in terms of comfort.

Reduce is the key

As a previous step to see the different options with which we can hide the wiring, it is convenient to know what is the key to making this work easier: minimize the cables we use on our desk. Work in the many current peripherals have elements that make the process easy.

As examples, we have keyboards and mice, which today are fully wireless and have a quality response. The same goes for the speakers, being able to resort to a model with Bluetooth connectivity if we want to remove another element from our environment. A task that modern Unifying connectors simplify, by controlling several devices with a single USB connector.

What we will not be able to choose is objects such as the monitor, which will necessarily have to carry both the electrical connection cable and the data cable, either through HDMI or DisplayPort. In these cases, it is appropriate to suppress the temptation to fully deploy the cable that the product has unless it is strictly necessary. Rather, we should take the opportunity to keep the cable as short as possible, hiding behind the monitor or tower that excess cable, whenever possible.


If you are looking for a simple and low-cost solution to organize your cables, the flanges are the answer to what you need. These flanges, identical to those used for all types of hardware works, make it easy to create a compact cable package, preventing them from being scattered around your desk.

Its installation is as simple as placing the cables inside the flange, introducing the tip of the flange in the introduction area, and gradually pulling until the cables are in an optimal position and properly tightened. Once we have the compacted cable package, we no longer have to cut the excess plastic from the flange to complete the assembly. The process is repeated as many times as necessary and can give form and orientation to the cable package, as necessary. As an inconvenience, if you have to remove a cable from the package, it is very likely that you have to remove all the flanges and repeat the process.


As an alternative to flanges, with greater comfort and at an interesting price, we have velcro. These velcro work on the same principle as the flanges, but they have the advantage of being able to open if necessary. So if we need to change any of the cables we have inside, we have only to open the necessary strips, make the change and close them again.

As with other options, it is interesting to choose the most suitable models for our specific needs, since the length of the flange and its equivalent diameter vary. It is always convenient to choose a measure slightly higher than what we need so that we do not have problems when moving the cables. In case of excess, it is enough to tighten the velcro a little more to absorb that excess.

The gutters

Gutters are another interesting solution when it comes to hiding and keeping cables under control. These gutters consist of a rectangular plastic housing, inside which we will accommodate the cables. The advantage of the gutter is that it is placed attached to the wall, for which the piece includes a plastic adhesive in the back area of the same, which allows maintaining the position of the cables provided that they do not exert excessive tension About the piece.

This aspect also makes it easier to install, which also contributes to the design of the two layers of the gutter. Specifically, the upper part can slide over the lower part through side flanges, so that once the cables are inserted inside, simply slide that upper flange so that they are hidden. Additionally, it is also possible to snap the two parts together to close the space. As a tip, consider the thickness of the cables when choosing the gutter, so that everything fits as it should. And in case you want to place or run the cables on the floor, bet on a semicircular gutter, which does not pose a risk of tripping when moving.

Let your imagination fly

If these remedies know you little, there are thousands of creative solutions to keep the cables hidden in your desk. One of these options is to place a strip at the bottom of the desktop, so it is easy to hide the cables here and have only the plug of that gutter insight.

Another option is to use the cable organizers, with which we can direct them along with the desk in the way that suits us. Some of them serve several cables, so everything is much easier if we use them correctly according to our needs.

As a final tip, it is important to be creative. Do not worry about getting out of the conventional or trying things until you find the most suitable combination for your desk. After all, it is your place of work, so nobody better than you to decide how you want things to be placed and organized.

Leave a Comment